Nazolin Caution For Usage

Patient Information: Before using Nazolin nasal spray: 1. Shake the bottle gently, then remove the dust cap.
2. Hold the bottle with the forefinger and middle finger on either side of the nozzle and the thumb underneath the bottle.
3. Before using the nasal spray for the first time, or if the patient has not used it for a longer period, with the nozzle pointing away from from the patient, press several times until a fine uniform mist comes out of the nozzle.
4. Blow nose gently.
5. Close one nostril and put the nozzle in other nostril, tilt head slightly forward keeping the nozzle in the upright position.
6. Start to breathe in through the nose and while breathing in, press down with fingers once to release a spray.
7. Breathe out through the mouth. Repeat steps 6 and 7 to have a second spray.
8. Repeat steps 5, 6, and 7 for the other nostril.
9. After use: Wipe the nozzle with a clean cloth and replace the dust cap.
Cleansing: The nasal spray should be cleaned at least once a week.
1. Push the nozzle upwards to detach form the bottle.
2. Wash the nozzle and dust cap in warm water. Shake off excess water and leave to dry in warm place. Avoid excessive heat.
3. Replace the nozzle and dust cap.
4. If the nozzle becomes blocked, remove it and soak in warm water. Rinse under a cold tap. Allow to dry and refit. Do not use a pin or other sharp objects to unblock the nozzle.
Note: The first time the patient use nasal spray, the patient may sneeze a few times. This is because the lining of the nose is very sensitive. This is not likely to happen after the first few dose. The medication, at times cause, a few side effects in certain hypersensitive individuals. If the patient notice any bleeding from the nose or experience any other discomfort, please inform physician.
Use as directed by the physician. Do not exceed recommended dose. Keep out of reach of children.