Advertisement
Advertisement
Salmeflo

Salmeflo Caution For Usage

salmeterol + fluticasone

Manufacturer:

Lloyd

Distributor:

InnoGen Pharmaceuticals
Full Prescribing Info
Caution For Usage
MDI: Instructions for Use/Handling: Before using for the first time or if the inhaler has not been used for a week or more remove the metal canister and mouth piece cover out of the inhaler rinse the plastic body and mouth piece cover under running tap water and shake it well to remove excess water and leave it dry in warm place. After drying re-assemble and lace back in the outer plastic container.
Using the Inhaler: 1. Take off the cap and shake the inhaler.
2. Breathe out all the way.
3. Hold the inhaler 1 to 2 inches in front of the mouth (about the width of 2 fingers).
4. Start breathing in slowly through the mouth, and then press down on the inhaler one time. Breathe in slowly, as deeply as the patient can.
5. Slowly count to 10 while holding the breath (if the patient can). This lets the medicine reach deep into the lungs.
6. If the doctor prescribed more than 1 puff of medicine, repeat procedure, starting with step 2.
7. Rinse the mouth afterwards, to remove residue of the medicine.
Usage by children: Parents must assist children who need help in the proper use of inhaler.
DPI: Direction for Use: Remove the cap of the INNOhaler.
Steadily hold the base and open the INNOhaler turning the nozzle counterclockwise (see the arrow on the nozzle itself).
Introduce the capsule into the loading chamber.
Close the nozzle turning it counterclockwise.
Thoroughly press the two buttons, keeping the INNOhaler in vertical position.
Deeply breathe out.
Introduce the whole nozzle into the mouth and breathe in, closing the lips (avoid air passing around the nozzle). Try it again (three to four times), till the capsule is completely empty.
After use, extract the empty capsule and close the INNOhaler.
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement