Nasoflo Caution For Usage

Directions for Use: Before using: 1. Shake the bottle vigorously and remove the dust cap.
2. Hold the device with the forefinger and middle finger on either side of the nozzle and the thumb underneath the bottle.
3. Before initial use or if the product has not been used for several days, test the spray. With the nozzle pointing away from the body, press the nasal applicator several times until a fine mist comes out from the container.
Using the Spray: 4. Gently blow the nose to clear the nostril.
5. Close one nostril. Tilt the head slightly forward, keep the container upright, and carefully insert the nasal applicator into the open nostril.
6. Breathe in through the nose, and while breathing in press the while collar firmly down once to release a spray. Avoid spraying in eyes.
7. Breathe out through the mouth.
8. If a second spray is required in that nostril, repeat steps 4 to 6.
9. Repeat steps 4 to 7 in the other nostril.
After Use: 10. Wipe the nasal applicator with a clean tissue and replace the dust cap.
11. Rinse the mouth with water after finishing taking a dose. Do not swallow.
Cleaning Instructions: The nasal spray should be cleaned in the following way at least once a week: 1. Remove the dust cap.
2. Push on the white collar upward gently to detach the nasal applicator from the valve.
3. Wash the applicator and dust cap in warm water. Shake off the excess water and allow to dry at room temperature. Avoid excessive heat.
4. Push the applicator back on top of the bottle and replace the nasal applicator.
If the nasal applicator becomes blocked, soak the nasal applicator in warm water. Rinse with cold water, dry, and replace the nasal applicator. Do not use a pin or other sharp object to clean/unblock the nasal applicator.