Hylo-Gel Caution For Usage

Only use HYLO-GEL if the sealing of the folding carton was intact before the first use.
Remove cap before use.
Before the first application, the HYLO-GEL bottle with its tip down and press onto the bottom of the bottle until the first drop appears at the nozzle. The bottle is ready for further use. Hold the bottle upside down with the thumb on the shoulder of the bottle and the other fingers on the bottom of the bottle.
Support the hand holding the COMOD-bottle.
Lean the head back slightly, gently pull down the lower eyelid and apply a strong quick pressure on the middle of bottom of the bottle.
This activates the mechanism for the release of one drop. Because of the special COMOD valve system, size and speed of each drop are the same independently on how much pressure is applied. Slowly close the eyes to allow the fluid to spread evenly on the eye surface.
Replace cap immediately after use. Take care that the dropper tip is dry.
When applying the fluid, avoid any contact between the tip of the bottle and the eye on the skin.
The COMOD-bottle releases 10 mL of solution which is the equivalent of approximately 300 drops. For technical reasons, a small amount remains in the bottle at the end of exhaustion.
HYLO-GEL is suitable for long-term treatment.
One bottle HYLO-GEL should be used only by the same person.