Incompatibilities: In the absence of compatibility studies, this vaccine must not be mixed with other medicinal products.
Special precautions for disposal and other handling: During storage, a white deposit and clear supernatant may be observed in the pre-filled syringe containing the suspension. Pre-filled syringes should be stored horizontally to minimise the resuspension time.
Preparation for administration: Step 1. Vaccine resuspension: Hold the pre-filled syringe horizontally between the thumb and the forefinger and shake vigorously until the contents of the syringe are a homogeneous white suspension. Do not use the vaccine if it cannot be resuspended.
Step 2. Visual inspection: Visually inspect the vaccine for large particulate matter and discolouration prior to administration. Do not use if large particulate matter or discolouration is found. If the vaccine is not a homogeneous white suspension, repeat steps 1 and 2. Step 3. Remove syringe cap: Remove the syringe cap from the Luer lock adapter by slowly turning the cap counter clockwise while holding the Luer lock adapter.
Note: Care should be taken to ensure that the extended plunger rod is not depressed while removing the syringe cap.
Step 4. Attach a sterile needle: Attach a needle appropriate for intramuscular administration to the pre-filled syringe by holding the Luer lock adapter and turning the needle clockwise.
Any unused product or waste material should be disposed of in accordance with local requirements.