Frisolac CM Dosage/Direction for Use

See Table 2.

Click on icon to see table/diagram/image

Preparation Instruction: In the interest of the baby's health, follow these instructions: 1. Place cleaned utensils into the water. Ensure utensils awash completely and no air bubbles are trapped.
2. Cover the pot and bring to boil. Ensure the water in the pot does not dry out.
3. Wash hands with soap and water before preparing milk.
4. Read label instructions on correct mix of milk and water. Wrong mixture could make infants ill.
5. Pour boiled water that has been cooled to 40°C into a clean and sterilized bottle. Use a clean and sterilized non-mercury thermometer to measure the temperature. Be cautious as to avoid any burns.
*Water temperature will vary depending on the preparation method every formula.
6. Add the exact amount of formula to the water in the bottle.
7. Mix thoroughly by swirling the bottle.
8. Cool to the feeding temperature by holding it under cold running tap water. Make sure the level of the cooling water is below the lid of the bottle to avoid contamination.
9. Check the temperature of the feed by dripping a little onto the inside of the wrist. Feed when milk is lukewarm.
10. Discard unfinished milk that has not been consumed within 1 hour.