Vismed: 1 ml solution contains sodium hyaluronate 1.8 mg, sodium chloride, potassium chloride, disodium phosphate, sodium citrate, magnesium chloride, calcium chloride and water for injections. The solution is hypotonic.
Sodium hyaluronate from fermentation 0.18%. Lubricant eye drops. Sterile, free from preservatives.
Vismed Multi: 1 ml solution contains sodium hyaluronate 1.8 mg, sodium chloride, potassium chloride, disodium phosphate, sodium citrate, magnesium chloride, calcium chloride and purified water. The solution is hypotonic.
Sodium hyaluronate from fermentation 0.18%. Lubricant eye drops. Sterile, free from preservatives.
Vismed Gel: 1 ml solution contains sodium hyaluronate 3.0 mg, sodium chloride, potassium chloride, disodium phosphate, sodium citrate, magnesium chloride, calcium chloride and water for injections. The solution is hypotonic.
Sodium hyaluronate from fermentation 0.3%. Hydrogel for sustained lubrication of the eyes. Sterile, free from preservatives.
Characteristics and mode of action: VISMED/VISMED MULTI/VISMED GEL contains sodium hyaluronate, a natural polymer, which is also present in the structures of the human eye. The particular physical characteristics of sodium hyaluronate confer to VISMED/VISMED MULTI/VISMED GEL its viscoelastic and water retaining properties. VISMED/VISMED MULTI/VISMED GEL provides a stable coating on the surface of the eye which is only slowly eliminated by blinking. Therefore VISMED/VISMED MULTI/VISMED GEL combines long lasting relief with maximum comfort. VISMED/VISMED MULTI/VISMED GEL is well tolerated due to its unique composition. VISMED/VISMED MULTI/VISMED GEL is free from preservatives.
Vismed/Vismed Multi: For lubrication of the eyes in case of sensation of dryness, burning and ocular fatigue and other minor complaints of no pathological significance induced, for example, by dust, smoke, dry heat, air conditioning, wind, cold, extended computer screen use or contact lens wear (rigid or soft).
Vismed Gel: For sustained lubrication of the eyes in case of sensations of dryness, burning and ocular fatigue and other minor complaints of no pathological significance, induced, for example, by dust, smoke, dry heat, air conditioning, extended computer screen use, contact lens wear (rigid or soft) or by ophthalmological screening methods.
Vismed/Vismed Gel: Twist off the tab. Tilt the head backwards and position the tip of the container above the eye to be treated. Move the lower eyelid down with the forefinger of one hand. Press the container and one drop of VISMED/VISMED GEL will easily flow out. If not otherwise recommended, instill 1 or 2 drops of VISMED/VISMED GEL onto the eye as often as needed. After blinking, the solution will disperse and form a transparent and long lasting coating on the surface of the eye. VISMED/VISMED GEL may also be used while wearing contact lenses (rigid or soft).
Vismed Multi: Tear off the tamper-evident seal before the first administration. Remove the protective cap. Tilt the head backwards and position the tip of the container above the eye to be treated. Move the lower eyelid down with the forefinger of one hand. Press the container and one drop of VISMED MULTI will easily flow out. If not otherwise recommended, instill 1 or 2 drops of VISMED MULTI onto the eye as often as needed. After blinking, the solution will disperse and form a transparent and long lasting coating on the surface of the eye. VISMED MULTI may also be used while wearing contact lenses (rigid or soft).
Individual hypersensitivity to any constituent of the product.
Vismed/Vismed Gel: Do not touch the tip of the opened container and do not touch the surface of the eye with the tip of the opened container. Otherwise the container should be discarded immediately after use. Reclose the container after use. As VISMED/VISMED GEL does not contain preservatives, the solution should be used within 12 hours after opening. Any solution not used within 12 hours after opening must be discarded. Otherwise the sterility is no longer guaranteed and this may be associated with a risk of infection. Do not use VISMED/VISMED GEL if the container is damaged.
Vismed Multi: Do not touch the tip of the opened container and do not touch the surface of the eye with the tip of the container. Put the protective cap back on after using VISMED MULTI. Do not use VISMED MULTI if the container is damaged. VISMED MULTI can be used up to 3 months after first use. Any solution not used within 3 months after opening must be discarded. Otherwise the sterility is no longer guaranteed and this may be associated with a risk of infection.
On very rare occasions transient disorders such as irritation of the conjunctiva, foreign body sensation, redness or burning sensation of the eye, short-term blurred vision may occur.
Do not use VISMED/VISMED MULTI/VISMED GEL at the same time as any drug or other product applied to the eye since it may modify their effects.
Store below 30 °C. Do not freeze.
If discomfort persists while using VISMED/VISMED MULTI/VISMED GEL consult a physician.
S01XA20 - artificial tears and other indifferent preparations ; Belongs to the class of other ophthalmologicals.
S01KA01 - hyaluronic acid ; Belongs to the class of viscoelastic substances used as ophthalmologic surgical aids.
Vismed Gel eye gel 0.3 %
0.45 mL x 20 × 1's
Vismed Gel Multi eye gel 0.3%
10 mL x 1's
Vismed eye soln 0.18 %
0.3 mL x 20 × 1's
Vismed Multi eye soln 0.18 %
(preservative-free) 10 mL x 1's
Sign Out
