Dalman AQ Caution For Usage

Before using: 1. Shake the bottle gently and then remove the dust cover.
2. It is necessary to prime the pump into air the first time it is used, or when it has not been used for a week or more. To prime the pump, hold the bottle with the nasal applicator pointing away and with the forefinger and middle finger on either side of the nasal applicator and the thumb underneath the bottle. When the pump is primed for the first time, press down and release the pump for several times.
Using the spray: 3. Blow the nose to clear the nostrils.
4. Close one nostril. Tilt the head forward slightly and, keeping the bottle upright, carefully insert the nasal applicator into the other nostril.
5. Start to breathe in through the nose, and while breathing in, press firmly down once on the applicator to release the spray.
6. Breathe out through the mouth. If a second spray is required in that nostril, repeat steps 5 through 6.
7. Repeat the same steps in the other nostril.
After using: 8. Wipe the nasal applicator with a clean tissue and replace the dust cover.
Cleaning: 1. Remove the dust cover and wash the applicator under warm tap water.
2. Allow to dry at room temperature, avoid too hot.
3. Replace the applicator and dust cover back on the bottle.
4. If the nasal applicator becomes blocked, it can be removed as previously mentioned and left to soak in warm water. Rinse with cold tap water, dry, and refit. Do not try to unblock the nasal applicator by inserting a pin or other sharp object.